In addition to the daily maintenance and maintenance of the high-pressure cleaner, we must also learn to troubleshoot some minor problems that usually occur. Let’s analyze with you the causes and treatment methods for the insufficient outlet pressure of the high-pressure cleaner. :

1. The high-pressure nozzle of the high-pressure cleaner is severely worn. Excessive wear of the high-pressure nozzle will affect the water outlet pressure of the equipment. Replace the new nozzle in time.

2. Insufficient inlet water flow of the connected equipment leads to insufficient water flow and thus insufficient output pressure. Sufficient inlet water flow should be supplied in time to solve the problem of reduced outlet pressure.

3. There is air in the high-pressure cleaner to clean the water inlet filter. After cleaning the air in the water inlet filter, ensure that the standard outlet pressure is output.

4. After the aging of the overflow valve of the high-pressure cleaner, the overflow flow of the water will be large and the pressure will be low. When it is found to be aging, the parts should be replaced in time.

5. Leakage of the high and low pressure water seal and the water inlet and outlet check valves of the high-pressure cleaner has caused the working pressure to become lower. These accessories should be replaced in time.

6. The high-pressure pipe and the filter device are kinked, bent or damaged, resulting in poor water flow, resulting in insufficient water pressure, and should be repaired in time.

7. The internal failure of the high-pressure pump, the wearing of vulnerable parts, and the decrease of water flow; the internal pipeline of the equipment is blocked, and the water flow is too small, resulting in low working pressure.

Good cleaning equipment should know how to maintain and maintain it in time to increase the service life of cleaning equipment and reduce cleaning costs.